Brands There are 10 brands
-
Construction Plywood
Construction plywood made from durable face and core with few defects so it performs longer in both humid and wet conditions and resists with WBP gluing.
-
Laminated MDF
Laminated MDF provides many of the advantages of MDF with a decorative PVC surface layer. In modern construction, spurred by the high costs of hardwoods, manufacturers have been adopting this approach to achieve a high-quality finishing wrap covering over a standard MDF board.
-
Laminated Plywood
Laminated plywood is a material manufactured from thin layers or "plies" of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another then coated with soft or hard thin sheet of PVC with smooth or 3D touchable wood grains sense in one or both sides.
-
Melamine Door Skin
Melamine laminated door skin panels are a type of manufactured hot press molded HDF panels, used high grade HDF panel with thin sheets of substrates (water proof) melamine paper, using for making doors with matt surface.
-
OSB
Oriented strand board (OSB) is a wood structural panel manufactured from rectangular-shaped strands of wood that are oriented lengthwise and then arranged in layers, laid up into mats, and bonded together with moisture-resistant, heat-cured adhesives.
-
Particle Board
Particle board is manufactured from wood chips, sawmill shavings, or even sawdust, and a synthetic resin or another suitable binder, which is pressed and extruded. Oriented strand board, also known as flakeboard, wafer board, or chipboard, is similar but uses machined wood flakes offering more strength then laminated with different type of thin sheet in one or both sides.
-
Plywood
Typical plywood panel has face veneers of a higher grade than the core veneers. The principal function of the core layers is to increase the separation between the outer layers where the bending stresses are highest, thus increasing the panel's resistance to bending. As a result, thicker panels can span greater distances under the same loads.
-
Raw MDF
Medium-density fiberboard (MDF) is an engineered wood panel made by breaking down hardwood or softwood residuals into wood fibers, MDF is generally denser than plywood.
-
Veneer Door Skin
Veneer laminated door skin panels are a type of manufactured hot press molded HDF panels, used high grade HDF panel with thin sheets of natural veneer made from log, using for making doors.
-
Wood Based Board
Engineered wood, also called mass timber, composite wood, man-made wood, or manufactured board, includes a range of derivative wood products which are manufactured by binding or fixing the strands, particles, fibers, or veneers or boards of wood, together with adhesives, or other methods of fixation to form composite material.
Top sellers
-
Laminated Plywood
$10.00 -
OSB Board
$78.30 -
Veneer Door Skin
$4.80 -
Raw MDF
$23.00
New products
-
Raw MDF
$23.00 -
Melamine Door Skin
$3.45 -
Construction Plywood
$12.00
